3
10) Programming in Holidays and Special Day mode 30
11) Technician menu programming 32
11.1 Time synchronisation menu 33
11.1.1 Programmable time changeover 34
11.1.2 Setting the time base 35
11.2 Time output management menu 36
11.3 IP conguration menu 38
11.4 Relay setting menu 39
11.5 RHF circuit function setting menu 40
11.6 Function setting menu 41
11.7 “Delete all programming” menu 42
11.8 CPU software download menu 43
11.9 Factory setting restoration menu 44
12) Priority of execution of programs 45
13) Alarm messages 46
14) Options 48
14.1 Mechanical installation 48
14.2 Option board with 3 AFNOR outputs 49
14.3 Option board with 2 ASCII outputs 50
14.4 Option board impulse // 52
14.5 Option board with 2 serial outputs (24VDC power supply) 53
14.6 Option board with 2 serial outputs (48VDC power supply) 54
14.7 relay option board 56
14.8 Option board with AFNOR input 57
14.9 Three inputs option card 58
15) Technical characteristics 59
Appendix I : NTP programming 61
IP function programming 61
IP network conguration and protocols supported : 63
16 ) What to do if ...? Check that … 64
To Next Page
Loading...
