43
English
4 - Maintenance
Daily maintenance
The display screen appears after start up with the definition below:
Operation Frequency
Check the mandrel thread
Control the batter y load level
Everyday
Everyday
Add grease inside the traction fork Each mandrel replacement
Replacement or cleaning of the mandrel
The RIVKLE
®
should be screwed freely by hand
Between 5 000 and 10 000 cycles
Oil draining and filling up Between 5 000 and 15 000 cycles
Replacement of the anvil
(If the internal diameter is > D + 0.5mm)
Between 25 000 and 50 000 cycles
INSPECTION 1
Controling the main fonctions and performances
Every 250 000 cycles
Replacement of the oil and draining
Calibration of setting load
INSPECTION 2
Full maintenance of the setting head (seal parts, spring, …)
Replacement of the traction fork
Every 500 000 cycles
To Next Page
Loading...
