BONFIGLIOLI active User Manual

06/054
4 06/05
1 General safety and application information
This documentation has been produced with the greatest of care and extensively and
repeatedly checked. For reasons of clarity, not all the detailed information on all types
of the product and also not every ima
ginable case of erection, operation or
maintenance have been taken into account. If you require further information or if
specific problems which are not dealt with extensively enough in the documentation
exist, you can request the necessary information via the local representation of the
company BONFIGLIOLI.
We would also point out that the contents of this documentation are not part of a
previous or existin
g agreement, assurance or legal relationship and are not intended
to amend the same. All obligations of the manufacturer result from the underlying
purchase contract, which also contains the complete and solely valid warranty
regulation. These contractual warranty provisions are neither extended nor limited by
the production of this documentation.
The manufacturer reserves the ri
ght to correct or amend the contents and the product
information as well as omissions without prior notification and assumes no kind of
liability for damage, injuries or expenditure to be put down to the aforementioned
reasons.
1.1 General information
Warning! BONFIGLIOLI VECTRON frequency inverters have high voltage levels
during operating, depending on their protection class, drive moving parts
and have hot surfaces.
In the event of inadmissible removal of the necessary covers, improper
use, wron
g installation or operation, there is the risk of serious damage to
persons or property.
To avoid the damage, only qualified staff may carry out the transport,
installation, setup or maintenance work required. Comply with the s EN
50178, IEC 60364 (Cenelec HD 384 or DIN VDE 0100), IEC 60664-1
(Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) and national
provisions. Qualified persons within the meanin
g of this principal safety
information are people acquainted with the erection, fitting,
commissioning and operating of frequency inverters and the possible
hazards and in possession of qualifications matching their activities.
1.2 Proper use
Warning! The frequency inverters are electrical drive components intended for
installation in industrial plant or machines. Commissioning and start of
intended operation are not allowed until it has been established that the
machine corresponds to the provisions of the EC machine directive
98/37/EEC and EN 60204. Accordin
g to the CE sign, the frequency
inverters additionally fulfill the requirements of the low-voltage directive
73/23/EEC and the s EN 50178 / DIN VDE 0160 and EN 61800-2.
Responsibility for compliance with the EMC directive 89/336/EEC is with
the user. Frequency inverters are available in a limited way and as
components exclusively intended for professional use within the meanin
g
of the EN 61000-3-2.
With the issue of the UL according to UL508c, the requirements of the
CSA Standard C22.2-No. 14-95 have also been fulfilled.
The technical data and the information on connection and ambient
conditions the rating plate and the documentation be complied with. The
instructions must have been read and understood before starting work at
the device.

BONFIGLIOLI active Specifications

General

Brand	BONFIGLIOLI
Model	active
Category	DC Drives
Language	English