BONFIGLIOLI active User Manual

506/05
06/05 5
1.3 Transport and storage
T
ransport and stora
g
e are to be done in an adequate way in the ori
g
inal packa
g
in
g
.
Stora
g
e shall be in dry rooms protected a
g
ainst dust and moisture with sli
g
h
t
temperature fluctuations. Please observe the climatic conditions according to EN
50178 and the marking on the packaging.
The duration of storage without connection to the admissible reference voltage may
not exceed one year.
1.4 Handling and positioning
Warning! Damaged or destroyed components may not be put into operation
because they may be a health hazard.
The frequency inverters are to be used according to the documentation, the directives
and the standards. Handle carefully and avoid mechanical overload. Do not bend the
components or change the isolation distances. Do not touch electronic components o
r
contacts. The devices contain construction elements with a risk of electrostatic, which
can easily be dama
ged by improper handling. Any use of damaged or destroyed
components shall be considered as a non-compliance with the applicable standards.
Do not remove any warning signs from the device.
1.5 Electrical connection
Warning! Before any assembly or connection work, de-energize the frequency
inverter. Make sure that the frequency inverter is de-energized.
Do not touch the sockets, because the capacitors may still be charged.
Comply with the information
given in the operating instructions and on
the frequency inverter label.
While working on the frequency inverters, obey the applicable standards BGV A2
(VBG 4), VDE 0100 and other national directives. Comply with the information in the
documentation on electrical installation and the relevant directives. Responsibility fo
r
compliance with and examination of the limit values of the EMC product standard EN
61800-3 for variable-speed electrical drive mechanisms is with the manufacturer of
the industrial plant or machine.
T
he documentation contains information on installation correct for EMC. The cables
connected to the frequency inverters may not be subjected to an isolation test with a
high test voltage without previous circuit measures.
1.6 Operation information
Warning! Before commissionin
g
and the start of the intended operation, attach all
the covers and check the sockets. Check additional monitorin
g
and
protective devices pursuant to EN 60204 and the safety directives
applicable in each case (e.
g
. Workin
g
Machines Act, Accident Prevention
Directives etc.).
No connection work may be performed, while the system is in operation.
1.7 Maintenance and service
Warning! Unauthorized opening and improper interventions can lead to physical
injury or damage to property. Repairs on the frequency inverters may
only be done by the manufacturer or persons authorized by the latter.

BONFIGLIOLI active Specifications

General

Brand	BONFIGLIOLI
Model	active
Category	DC Drives
Language	English