EN
22
Appliance description
www.bora.com
Activity Temperature
in °C
Steaming fruit, e.g. apple slices, peach halves,
banana slices
160 – 170
Browning chopped vegetables, fried eggs, veal,
poultry
180 – 190
Browning breaded or battered fish, pancakes,
sausages, pork, lamb
190 – 200
Browning potato fritters, prawns, corn on the
cob and escalopes
200 – 210
Fast browning beef, fish, meatballs 220 – 230
Browning steaks 250 (power
setting)
Tab. 4.15 Temperature recommendations (the specications
provided in the table are standard values)
4.3.7 Cooktop functions
Power control
The power levels are adjusted via the operating panel
by tapping or swiping movements on the touch slider.
Alternatively the power levels can also be set using the
touch buttons and above and below the touch
slider.
Cooktop power setting
When the power setting is activated, maximum cooking
zone power is available for a predefined time. The
available power is focused on the selected cooking zone,
meaning that the max. power of the other cooking zones
is automatically and temporarily reduced.
After 10 minutes, the cooking zone is automatically
switched back to power level
.
INFO Never heat up oil, fat and the like on the power
setting. The bottom of the pan can overheat due
to the high power output.
2-ring additional switching
A second, larger ring can be easily switched on. This
enables rapid adjustment to the cookware used.
Automatic heat up function
When the automatic heat up function is activated, the
cooking zone works at full power for a certain time and is
then automatically reset to the previously set level.
Suitable cookware is made of:
stainless steel, copper or aluminium
enamelled steel
cast iron
Pay attention to the cookware bottom. The base of
the cookware should not show any sign of curvature.
Due to incorrect temperature monitoring of the hob
caused by the air gap between the cookware and the
temperature sensor underneath the hob, overheating
may occur. The bottom of the cookware must not have
any sharp grooves or sharp edges to avoid scratching
the cooktop.
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
4.3.6 How the Tepan stainless steel grill
CKT works
Under each grilling area there is a heating element.
When a grilling zone is switched on, the heating element
generates heat that heats up the grill surface directly.
Power levels and temperature ranges
The power is adjusted via power levels that are also
shown in the operating panel display in °C (temperature
display).
Power level Temperature
in °C
1 = 150
2 = 160
3 = 170
4 = 180
5 = 190
6 = 200
7 = 210
8 = 220
9 = 230
P (power setting) = 250
Tab. 4.14 The temperatures corresponding to the power levels
The power output of the Tepan stainless steel grill heats
food extremely quickly. A slight adjustment is needed
in comparison to conventional cooking systems when
selecting the temperature in order to avoid burning food.
To Next Page
Loading...
