bora Classic 2.0 system - Safety Devices

EN
23
Appliance description
www.bora.com
Pan size recognition on induction cooktops
The cooking zone automatically detects the size of the
cookware and only focuses the energy on that area. It
also recognises cookware that is unsuitable or too small
or if there is no cookware present.
A cooking zone is not working if
v
,
is flashing in the
display. This happens if...

... it is switched on without cookware or with unsuitable
cookware.

... the base diameter of the cookware is too small.

... the cookware is removed from a cooking zone that is
switched on.
If no pot is recognised 9 minutes after setting a power
level, the cooking zone will switch off automatically.
Cooking zone timer (automatic cut-off)
When cooking zones are in operation, the automatic
cut-off function automatically switches off the selected
cooking zone once a preset time has lapsed.
If the selected cooking zone is not active when the timer
is started, only an acoustic signal will be heard when the
time has lapsed.
The timer function can be used on up to 4 cooking zones
(multi-timer).
Pause function
With the pause function all cooking zones can be quickly
and easily deactivated temporarily. When the function is
cancelled, operation resumes at the original settings.
The cooking session can be paused for max. 10 minutes.
Once 10 minutes have lapsed, all cooking sessions are
automatically ended.
Cleaning function on the Tepan stainless steel
grill
The cleaning function adjusts the Tepan stainless steel
grill to a constant temperature of 70 °C, which is perfect
for cleaning. This temperature is then maintained for
10 minutes.
4.4 Safety devices
4.4.1 Control lock
The control lock prevents unintentional use of the
cooktop extractor and cooktops during operation.

If the control lock is active, the symbol lights up.

The functions are locked and the indicators on the
display are dimmed (exception: power button).
Power level
(continuous cooking
level)
Cooking duration in min:sec
Cooktops CKFI, CKI, CKIW Cooktops
CKCH, CHCB
1
00:40 01:00
2
01:00 03:00
3
02:00 04:48
4
03:00 06:30
5
04:20 08:30
6
07:00 02:30
7
02:00 03:30
8
03:00 04:30
Tab. 4.16 Heating time overview
Variable warming function
With the 3 warming levels, meals that have already been
cooked can be kept warm at a constant temperature
without any risk of burning.

The maximum duration for the warming function is
limited to 8 hours.
There are three different warming levels:
Warming level Symbol Temperature
1
,
≈ 42 °C (90 °C in the
case of CKT)
2
:
≈ 74 °C (110 °C in the
case of CKT)
#
3
*
≈ 94 °C (130° C in the
case of CKT)
Tab. 4.17 Warming levels
INFO In practice the temperatures of the warming levels
may vary slightly as they are influenced by the
cookware, the amount of food and the different
heating technologies. The temperatures can also
vary due to the influence of the cooktop extractor.
Bridging function
With the bridging function two cooking zones can be
combined to form one large cooking zone. The power for
the combined zones is then adjusted by a single operating
control. Power adjustment takes place simultaneously
(both cooking zones are operated on the same power
level).
The bridging function is suitable for heating food, e.g. in a
roaster.