EN
30
Operation
www.bora.com
The cooking session is continued at the set power level
with only one active ring.
5.5.7 Bridging function
INFO When the bridging function is active, both cooking
zones on the appliance are coupled and operate
at the same cooking level.
INFO When the bridging function is active, the power
setting
cannot be used on cooktops CKFI, CKI,
CKIW, CKCH and CKCB. Use of the power setting
is possible on the Tepan stainless steel grill.
Activating the bridging function
Tap on an active cooking zone
Tap the bridging button
The bridging function is now active.
The bridging symbol lights up.
The second cooking zone is activated and operated on
the same power level.
Both cooking zone indicators show the same power
level.
Active additional cooking zone functions are adopted.
Changes to the power level now apply simultaneously
to both cooking zones.
INFO If both cooking zones on a cooktop are already
active, the bridging function cannot be activated.
If only one cooking zone is active, the bridging
function can be activated.
Deactivating the bridging function
Tap a cooking zone with an active bridging function
Long press on the bridging button
The bridging function is deactivated.
The selected cooking zone remains active.
or
Long press on the cooking zone with active bridging
function or long press on the bridging button
The bridging function is deactivated.
All cooking zones are deactivated.
INFO If no suitable cookware is detected (pan size
recognition) within 10 seconds on induction
cooktops with the bridging function active, the
bridging function will be disabled and the cooking
zones will be deactivated.
Tip for cooktops CKFI, CKI and CKIW: Transferring
cooking zone functions
With the aid of the bridging function, on induction
cooktops active cooking zone functions (e.g. heat up,
timer, warming) can be quickly and easily transferred
from one cooking zone to the other. Though the bridging
function is merely a means to an end.
Activate the bridging function
INFO If a higher level than 5 is set on the second
cooking zone when the power setting is activated,
the level will automatically be reduced to power
level 5.
INFO If a power level higher than 5 is set for the second
cooking zone, the active power setting on the first
cooking zone will be automatically switched back
to the previous level.
Activating the power setting for a cooking zone
Tap the required cooking zone
Tap on when power level 9 is active
or
long press on the top end of the slider (slider
position 7-9).
or
swipe to power level 9 and hold the position
An animation appears in the slider.
appears in the cooking zone display (flashing 3x at
first and then continuous).
INFO
After 10 minutes, the power setting is
automatically switched back to power level 9.
Deactivating the power setting
The power setting is deactivated early if another power
level is set (see Setting the power level).
5.5.6 Two-ring connection on cooktops
CKCH and CKCB
INFO The two-ring connection can also be activated
or deactivated when the heat-up, timer and
heat retention functions are active. When the
bridging function is activated, the second ring is
automatically activated.
Requirements for two-ring connection:
Cooking session with a power level >0
Activating the second ring
Tap the required cooking zone
Adjusting the power level
Tap the ring button
The second ring is activated in the chosen cooking
zone.
The cooking session is continued at the set power level
with two active rings.
The ring symbol is shown next to the cooking zone
indicator.
Deactivating the second ring
Tap the required cooking zone
Long press on the ring button
The second ring is deactivated.
To Next Page
Loading...
