Borri INGENIO COMPACT - Page 130

INGENIO COMPACT ИБП руководство пользователя
INGENIO COMPACT UPS user manual
OMS90051 РЕД. / REV. A 39
Menu Sub-menu Functions
Mimic Display
-
Display the UPS status, alarms, operating mode and
measurements. Refer to paragraph 4.3.
Command
1
Operation
 Normal mode
 ECO mode
 Shutdown
 Shutdown converter except bypass
 Cold start precharge ready
Buzzer &
Alarm
 Enable/disable buzzer
 Clear latched alarms and silence buzzer
Other
 Recover backfeed protection signal
 Battery test
Monitor
Identification Display UPS information
Real Time
Information
Display real time measurements of input, output, bypass
and battery.
Maintenance
Code
Display the maintenance code for technician to check the
status of the UPS.
Version Display the control MCU software and firmware version.
Configuration
Alarm
Set alarm latch function.
 General alarm
 Mains alarm
 Bypass alarm
 Over temperature
 Battery low
 Inverter overload
 Bypass overload
 Emergency stop
Mains
Select the measurements on mimic display. Bypass
Output
Management
Schedule Display the schedule
Schedule
setting
1
Define the schedule for the ECO mode operation
Battery test
schedule
1
Define the schedule for the battery test