Bosch CC488 - System Status - AC Fail Restore Report; System Status - Low Battery Report; System Status - Low Battery Restore Report; System Status - Access Denied (Code Retry)

CC488 | Quick Reference Guide | 2.0 Programming Parameters EN | 16
Bosch Security Systems | 6/04 | 4998152446B
2.11.4 System Status – AC Fail Restore
Report
Location
362 to 363
Location Default
Tens digit 362 10
Units digit 363 7
2.11.5 System Status – Low Battery Report
Location
364 to 365
Location Default
Tens digit 364 10
Units digit 365 1
2.11.6 System Status – Low Battery Restore
Report
Location
366 to 367
Location Default
Tens digit 366 10
Units digit 367 6
2.11.7 System Status – Access Denied
(Code Retry)
Location
368 to 370
Location Default
Code retry limit (0 = unlimited) 368 6
Tens digit 369 7
Units digit 370 12
2.11.8 System Status Reporting Options
Location
371
0 No Codepad Alarm Reports allowed
1 Report to Receiver 1
2 Report to Receiver 2
4 Report to both Receiver 1 and Receiver 2
8 Report to Receiver 2 only if Receiver 1 fails
2.12 Test Report Programming
2.12.1 Test Report Time (Automatic)
Location
372 to 378
Location Default
Hour of day (tens digit) 372 0
Hour of day (units digit) 373 0
Minute of day (tens digit) 374 0
Minute of day (units digit) 375 0
Test report (tens digit) 376 7
Test report (units digit) 377 1
Repeat interval in days 378 0
2.12.2 Test Reporting Dialler Options
Location
379
0 No Codepad Alarm Reports allowed
1 Report to Receiver 1
2 Report to Receiver 2
4 Report to both Receiver 1 and Receiver 2
8 Report to Receiver 2 only if Receiver 1 fails
2.13 Output Programming
2.13.1 Outputs
Location
380 to 409
Location Default
Output 1 (Default = Horn Speaker)
Event Code 380 1
Event Code 381 14
Polarity 382 0
Time Base 383 0
Time Base Multiplier 384 0
Time Base Multiplier 385 0
Output 2 (Default = Fire Alarm With Verification)
Event Code 386 2
Event Code 387 7
Polarity 388 10
Time Base 389 2
Time Base Multiplier 390 1
Time Base Multiplier 391 5
Strobe Output (Default = Strobe – Reset After 8 hrs.)
Event Code 392 2
Event Code 393 0
Polarity 394 6
Time Base 395 4
Time Base Multiplier 396 0
Time Base Multiplier 397 8
Relay Output (Default = Sirens Running)
Event Code 398 1
Event Code 399 15
Polarity 400 1
Time Base 401 0
Time Base Multiplier 402 0
Time Base Multiplier 403 0
Codepad Buzzer (Default = Entry/Exit Warning and Day
Alarm)
Event Code 404 0
Event Code 405 13
Polarity 406 2
Time Base 407 1
Time Base Multiplier 408 0
Time Base Multiplier 409 1