EasyManua.ls Logo

Bosch CC488 - Event Codes

Bosch CC488
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CC488 | Quick Reference Guide | 2.0 Programming Parameters EN | 17
Bosch Security Systems | 6/04 | 4998152446B
2.13.2 Event Codes
Event
Code
Description
0 0 EDMSAT – satellite siren (output 1 only)
0 1 System armed
0 2 System disarmed
0 3 Armed in STAY mode
0 4 Armed in AWAY mode
0 5 Pre-arming alert
0 6 Exit warning (all zones sealed) and entry warning
0 7 Exit warning
0 8 Exit warning finished
0 9 Kiss-off after end of exit time
0 10 Reserved
0 11 Entry warning
0 12 Entry warning and day alarm resetting
0 13 Exit warning and entry warning and day alarm
resetting
0 14 Day alarm resetting
0 15 Day alarm latching
1 0 Day alarm enabled
1 1 Telephone line fail
1 2 Kiss-off received
1 3 Fuse fail
1 4 AC fail
1 5 Low battery
1 6 Horn speaker fail
1 7 Sensor watch alarm
1 8 Codepad medical alarm
1 9 Codepad fire alarm
1 10 Codepad panic alarm
1 11 Codepad duress alarm
1 12 Access denied (code retries)
1 13 Reserved
1 14 Horn speaker (output 1 only)
1 15 Sirens running
2 0 Strobe
2 1 Silent alarm
2 2 Alarm in STAY Mode
2 3 Alarm in AWAY Mode
2 4 System fault
2 5 Fire alarm (resetting)
2 6 Fire alarm (latching)
2 7 Fire alarm (verification)
2 8 Remote control 1
2 9 Remote control 2
2 10 Remote control 3
2 11 Radio control output 1
2 12 Radio control output 2
2 13 Radio control output 1 - not in AWAY Mode
2 14 Radio control output 2 - not in AWAY Mode
2 15 Communications fail after 3 attempts
2.13.2 Event Codes (continued)
Event
Code
Description
3 0 Communications fail
3 1 Dialler disabled
3 2 Dialler active (on-line)
3 3 Ring detect
3 4 Codepad panic (multi-break) V1.05+
3 5 Mimic zone 1
3 6 Mimic zone 2
3 7 Mimic zone 3
3 8 Mimic zone 4
3 9 Mimic zone 5
3 10 Mimic zone 6
3 11 Mimic zone 7
3 12 Mimic zone 8
3 13 Reserved
3 14 Reserved
3 15 Reserved
4 0 Reserved
4 1 Reserved
4 2 Reserved
4 3 Reserved
4 4 Reserved
4 5 Chime
4 6 Zone not sealed
4 7 Zone not sealed after exit time
4 8 Reserved
4 9 AC mains cycle (60 Hz or 50 Hz)
4 10 Area 1 – zone unsealed (Solution 880 only)
4 11 Area 2 – zone unsealed (Solution 880 only)
4 12 Reserved
4 13 Reserved
4 14 Reserved
4 15 Reserved
5 0 Reserved
5 1 Reserved
5 2 Area 1 in alarm (Solution 880 only)
5 3 Area 2 in alarm (Solution 880 only)
5 4 Reserved
5 5 Reserved
5 6 Area 1 armed (Solution 880 only)
5 7 Area 2 armed (Solution 880 only)
5 8 Reserved
5 9 Reserved
5 10 Area 1 disarmed (Solution 880 only)
5 11 Area 2 disarmed (Solution 880 only)
5 12 Reserved
5 13 Reserved
5 14 Any areas armed (Solution 880 only)
5 15 Any areas disarmed (Solution 880 only)
6 0 Area 1 codepad data terminal (Solution 880 only)
6 1 Area 2 codepad data terminal (Solution 880 only)

Table of Contents

Related product manuals