Bosch CC488 - User Code Area Assignment; Domestic Telephone Numbers; Reserved; RF Programming

CC488 | Quick Reference Guide | 2.0 Programming Parameters EN | 20
Bosch Security Systems | 6/04 | 4998152446B
2.17 User Code Area Assignment
Location
462 to 477
Location Default
User Code 1 462 0
User Code 2 463 0
User Code 3 464 0
User Code 4 465 0
User Code 5 466 0
User Code 6 467 0
User Code 7 468 0
User Code 8 469 0
User Code 9 470 0
User Code 10 471 0
User Code 11 472 0
User Code 12 473 0
User Code 13 474 0
User Code 14 475 0
User Code 15 476 0
User Code 16 477 0
0 User code not assigned
1 User code assigned to Area 1
2 User code assigned to Area 2
3 User code assigned to both Area 1 and Area 2
2.18 Domestic Telephone Numbers
Location
478 to 525
2.19 Reserved
Location
526
Default
0
2.20 RF Programming
2.20.1 RF Options
Location
527
Default
0
1 Sound siren on RF Receiver fail
2 Sound siren on RF Receiver tamper/jamming
4 Unseal zone that fails supervision (if supervision enabled)
8 RF jamming monitoring allowed
2.20.2 RF Device Mapping for Devices 1 to 8
Location
528 to 535
Location Default
Map RF Device 1 to Zone (1 to 8) 528 1
Map RF Device 2 to Zone (1 to 8) 529 2
Map RF Device 3 to Zone (1 to 8) 530 3
Map RF Device 4 to Zone (1 to 8) 531 4
Map RF Device 5 to Zone (1 to 8) 532 5
Map RF Device 6 to Zone (1 to 8) 533 6
Map RF Device 7 to Zone (1 to 8) 534 7
Map RF Device 8 to Zone (1 to 8) 535 8
2.20.3 RF Device Mapping for Devices 9 to
16
Location
536 to 543
Location Default
Map RF Device 9 to Zone (1 to 8) 536 0
Map RF Device 10 to Zone (1 to 8) 537 0
Map RF Device 11 to Zone (1 to 8) 538 0
Map RF Device 12 to Zone (1 to 8) 539 0
Map RF Device 13 to Zone (1 to 8) 540 0
Map RF Device 14 to Zone (1 to 8) 541 0
Map RF Device 15 to Zone (1 to 8) 542 0
Map RF Device 16 to Zone (1 to 8) 543 0
2.20.4 Ring Burst Time (V1.07+)
Location
748 to 749
Location Default
Increments of 5 ms. (0 to 75 ms) 748 4
Increments of 80 ms. (0 to 1200 ms) 749 6
2.20.5 RF Signal Strength for Devices 1 to 8
Location
801 to 808
Location Default
Signal Strength for RF Device 1 801 0
Signal Strength for RF Device 2 802 0
Signal Strength for RF Device 3 803 0
Signal Strength for RF Device 4 804 0
Signal Strength for RF Device 5 805 0
Signal Strength for RF Device 6 806 0
Signal Strength for RF Device 7 807 0
Signal Strength for RF Device 8 808 0
2.20.6 RF Signal Strength for Devices 9 to
16
Location
809 to 816
Location Default
Signal Strength for RF Device 9 809 0
Signal Strength for RF Device 10 810 0
Signal Strength for RF Device 11 811 0
Signal Strength for RF Device 12 812 0
Signal Strength for RF Device 13 813 0
Signal Strength for RF Device 14 814 0
Signal Strength for RF Device 15 815 0
Signal Strength for RF Device 16 816 0
2.21 System Option Programming
2.21.1 Default Options
Location
900
0 Defaulting System Allowed
15 Defaulting System Disabled
2.21.2 System Time
Location
901 to 904
Location Default
Hour of the day (tens digit) 901 0
Hour of the day (units digit) 902 0
Minute of the day (tens digit) 903 0
Minute of the day (units digit) 904 0