Bosch CL400 - Installation; Mechanical Assembly

Flexible Automation
Installation
6-4
1070 072 143-101
6.2 Electrical installation
Electrical installation must be carried out according to configuration direc
tives VDE 0100 and VDE 0113.
All subracks must be connected to the PE conductor by a cross-sectional
area as large as possible, at least 6 mm
2
.
With connections between
D AG/PS and AG/ZS and
D AG/ZS and AG/ZS
the flat plugs must be connected to earth with the
symbol on the front
panel.
AG/ZSEG2
EG2AG/PS
AG/ZS
NT
GG2
Fig. 6-4 PE terminal