Bosch CL400 - PE Terminal; Ordering Information

Flexible Automation
Subracks
2-5
1070 072 143-101
PE terminal
The basic unit must be equipped with adequate connection to a PE con
ductor.
. Slot 8 of subrack GG2/K must not be fitted with a system module, since
this slot is not sufficiently cooled by the fan unit.
. Dummy slots in a subrack must be sealed with dummy covers, be
cause otherwise the air circulation will be impaired.
. The following modules must not be plugged into the basic unit:
D Expansion module AG/ZS
D RM4DP
Ordering information
Designation Order no.
Subrack GG2 1070 062 324
Subrack GG2/K 1070 075 751
Fan unit with 3 fans 1070 062 325
Fan unit with 2 fans 1070 052 243
Fan unit K with 1 fan 1070 056 864
Power supply module NT1 1070 071 376
Power supply module NT2 1070 062 687
Power supply module NT3 1070 062 309
Power supply module NT24 1070 068 046
Central processing unit ZS400 1070 070 309
Buffer battery for NT1, NT2, NT3 and NT24 1070 914 447
Cable duct CL 1070 054 152
Dummy cover 1070 046 208
Fig. 2-4 Basic unit, ordering information