Bosch CL400 - Nt3; Nt24; Power Input

Flexible Automation
Power supply modules
3-3
1070 072 143-101
NT3
The NT3 power supply module is a powerful model for the maximum ca
pacity of the CL400.
The NT3 power supply module provides the 5 V and 12 V supply voltages
with a combined maximum power output of 153 W, i.e. the 5 V and 12 V sup
ply voltages may not both be loaded with their maximum current values of
26 and 6 A respectively.
NT24
The NT24 power supply module is desgined for a supply nominal voltage of
24 V-. It can be supplied via battery or rectifier.
The NT24 power supply module provides the 5 V and 12 V supply voltages
with a combined maximum power output of 99 W, i.e. the 5 V and 12 V sup
ply voltages may not both be loaded with their maximum current values of
11.2 and 4.4 A respectively.
Power input
The maximum power input of the control must be calculated when select
ing the suitable power supply module. The power inputs of the individual
modules must also be added for each supply voltage; see fig. 3-3.