Bosch CL400 - Control Component Safety

Safety instructions and reading help
VI
1070 072 143-101
Qualified personnel are persons who
D as planning personnel, are familiar with the safety guidelines used
in electrical engineering and automation technology.
D as operating personnel, are familiar with the equipment used in the
field of automation technology and are thus familiar with the operat
ing instructions in this manual.
D as commissioning personnel, are authorized to commission,
ground and classify electric circuits and devices/systems in accord
ance with the relevant safety standards.
Safety instructions on the control components
The following warnings and notices may be indicated on the control com
ponents themselves and have the following meaning:
Danger: High voltage!
Danger: Battery acid!
Electrostaticallysensitive components!
Disconnect at mains before opening!
Pin for connecting PE conductor only!
For screened conductor only!