Bosch CL400 - Interface X31

Flexible Automation
Central processing unit ZS400
4-15
1070 072 143-101
4.2 Interface X31
Interface X31
Fig. 4-11 Interface X31
The programming unit is connected to the ZS400 at interface X31. The pro
tocol BUEP19E is used for data transmission, see manual:
CL400 / CL500
Übertragungsprotokolle R500
Bausteinbeschreibung
The interface has a 25pin subD socket and can be used as a V.24 or 20 mA
interface as desired by connecting the appropriate cable.
Ordering information
Description
Order no.
Connection cable K16 1070 054 956
Übertragungsprotokolle R500, Bausteinbeschreibung 1070 070 117
Fig. 4-12 Connection cable K16, ordering information