Flexible Automation
System introduction CL400
1-9
1070 072 143-101
1.5 Slots
The possible slots in the subracks for the basic and expansion units are
given for each module in the module description. The possible slots are
highlighted in grey as in the following examples.
System modules
System modules are modules which exchange data via the system bus.
The use of system modules is only possible in the basic unit with GG2 or
GG2/K subracks.
GG2
1234567891011121314
Slots
Basic units
12345678
GG2/K
Fig. 1-5 Slots, system modules
. Slot 8 of subrack GG2/K must not be fitted with a system module, since
this slot is not sufficiently cooled by the fan unit.
Peripheral modules
Peripheral modules are modules which exchange data with the ZS400 cen
tral processing unit via the peripheral bus. They can be fitted in basic and
expansion units.
EG2GG2
12345678910111213141234567891011121314
Slots
EG2/K
12345678
GG2/K
12345678
Basic units Expansion units
Fig. 1-6 Slots, peripheral modules
To Next Page
Loading...
