Flexible Automation
System introduction CL400
1-3
1070 072 143-101
1.2 Configuration
Basic unit
The CL400 always consists of a basic unit first and foremost. Two subracks
are available for the basic unit,
D Subrack GG2 with 14 slots and
D Subrack GG2/K with 8 slots.
The basic unit contains
D the power supply module and
D the ZS400 central processing unit.
The remaining slots can be fitted with additional system or peripheral mod
ules.
Fig. 1-2 CL400, basic unit
If the maximum 14 basic unit slots are insufficient for control unit configur
ation, then additional peripheral modules can be fitted in expansion units.
To Next Page
Loading...
