Safety instructions and reading help
V
1070 072 143-101
Safety instructions and reading help
Read this instruction manual before you use the CL400. Keep this manual in
a place where it is always accessible to all users.
Standard operation
This instruction manual contains all of the information required for standard
operation of the described products.
The products described were developed, manufactured, tested and do
cumented in accordance with the relevant safety standards. There should
be no risk of danger to personnel or property if the specifications and safety
instructions relating to the project phase and installation and correct oper
ation of the product are followed.
Qualified personnel
This instruction manual is designed for specially trained PLC personnel.
The relevant requirements are based on the job specifications as described
by the ZVEI, see:
Anforderungsprofile für SPSFachkräfte
I + K SPEKTRUM 19
Hrsg.: ZVEI
Stresemannallee 19
60596 Frankfurt
Federal Republic of Germany
ISSN 0932-5018
This instruction manual is designed for PLC engineer.
Interventions in the hardware and software of our products which are not
described in this instruction manual may only be performed by our skilled
personnel.
Unqualified interventions in the hardware or software or noncompliance
with the warnings listed in this instruction manual or indicated on the prod
uct may result in serious personal injury or damage to property.
To Next Page
Loading...
