Flexible Automation
Subracks
2-6
1070 072 143-101
2.3 Subracks EG2 and EG2/K
Subracks EG2 and EG2/K are used for the expansion unit. They consist of a
19" or 11.8" wide metal casing with 14 or 8 slots.
. Information on dimensions and assembly is contained in section 2.1
Subracks GG2 and GG2/K.
Assembly examples for various configurations of the subracks and for the
fitting of fan units may be found in section 6.1 Fan mounting and assembly
of the subracks.
A cable duct can be installed at the lower front side. This opens outwards
and makes possible the identification of the module fitted.
To Next Page
Loading...
