D7212GV3 | Program Entry Guide | 5.0 Schedules (Skeds) EN | 110
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
5.3 Holiday Indexes
This programming module has two sections:
Add/Change/Delete and View Holidays. Use the
Add/Change/Delete section to program the Holiday
Indexes. The View Holidays section is a view-only
section provided for your convenience. Use View
Holidays to review the dates programmed in the
Holiday Indexes.
5.3.1 Add/Change/Delete
Program the dates for each of the Holiday Indexes.
You can program up to four Holiday Indexes in the
control panel. Within each index, you can select up to
365 dates to be designated as holidays.
The Holiday Indexes function independently of each
other. The same day can be programmed in all four
schedules. Holiday Indexes are used in programming
O/C Windows, User Access Windows, and skeds.
Date
Default: _ _ / _ _
Selection: MM/DD (month and date)
This entry selects the month and day you are
designating as a holiday.
To delete the date completely removed the Holiday
setting by programming as No for all of the Holiday
Index # entries..
Holiday Index #
Default: None
Selection: Select Dates from the Calendar
Yes Use this date in Holiday Index 1.
No Do not use this date in Holiday
Index 1.
5.3.2 View Holidays
The View Holidays section is a view only section
provided for your convenience. Use View Holidays to
review the dates you programmed into each of the
Holiday Indexes.
You can view the first 100 dates programmed in each
of the indexes.
Index 1 Days
Default: Blank
Selection:
Enter group or press [] key
Press [ENTER GROUP] to view the dates
programmed in Holiday Index 1.
Press [] key to advance to the next Holiday Index.
Index 2 Days
Default: Blank
Selection:
Enter group or press [] key
Index 3 Days
Default: Blank
Selection:
Enter group or press [] key
Index 4 Days
Default: Blank
Selection:
Enter group or press [] key
To Next Page
Loading...
