Bosch D7212GV3 - Installing the Battery; Replacing the Battery; Battery Supervision

D7212GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters EN | 21
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
User Chng Reports
Selecting Yes enables a report to be sent when the
event occurs.
Table 15: User Change Reports
Report
Selection
s
Report Description
R# Date
Changed
Yes, No Date Change Event
R# Time
Changed
Yes, No Time Change Event
R# Delete
User
1
Yes, No
Delete User Code
Event
R# User Code
Change
Yes, No
User Passcode Add
or Change Event
R# Area
Watch
Yes, No
Start and end of
area watch
R# Card
Assigned
2
Yes, No
Card Assigned to
User Event
R# Change
Level
2
Yes, No
Access Control
Level Change Event
1
With R# Delete User Events, the control panel always
uses the account number from Area 1.
2
This event is not transmitted for the D7212GV3. Use
only the default setting.
Access Reports
Selecting Yes enables a report to be sent when the
event occurs.
Access Reporting is not available with
the D7212GV3.
Table 16: Access Reports
Report
Selection
s
Report Description
R# Access
Granted
1
Yes, No Access Granted Event
R# No
Entry
1
Yes, No No Entry Event
R# Door Lt
Open
1
Yes, No Door Left Open Event
R# Cycle
Door
1
Yes, No Open Door Event
R# Door
Unlocked
1
Yes, No Unlock Door Event
R# Door
Secure
1
Yes, No Secure Door Event
R# Door
Request
1
Yes, No RTE or REX Event
R# Door
Locked
1
Yes, No Locked Door Event
1
This event is not transmitted for the D7212GV3. Use
only the default setting.
2.3.10 Event Priority
Table 17 on page 22 shows the description of each
event, its priority, and event number.