Bosch D8125 Installation And Operation Guide

D8125 | Installation and Operation Guide | 4.0 Installation
30
Bosch Security Systems B.V. | 2020.04 |F01U036298-15
If an extra POPIT is installed the system will indicate that it is READY TO ARM. The “extra” POPIT message will
only be displayed when [COMMAND 44] is entered at the D1252A (see Figure 11). Non-normal conditions in all
POPITs assigned to the master zone with the extra POPIT may not be correctly reported as opens or shorts to
the D8112G. If all POPITs assigned to this master are normal, however, a normal condition will be correctly
reported.
E
X
TR
A
P
OP
IT
(n
o
t
di
s
pl
a
ye
d)
2
.
5
Z
1
PO
IN
T
S
6
2
.
1
2
Z
8P
O
IN
TS
0
0
PR
OG
R
AM
ME
D
2.6 Z2POINTS 6
2
.7
Z3
PO
I
NT
S
6
2
.8
Z4
P
OI
NT
S
6
2
.
9
Z
5
PO
IN
T
S
6
2
.
1
0
Z
6P
OI
N
TS
00
2
.
11
Z
7
PO
IN
T
S
0
0
MA
S
TE
R
Z
ON
E
1
:
6
MASTER ZONE 2: 6
M
AS
T
ER
Z
O
N
E
3
:
6
M
A
S
T
E
R
Z
O
N
E
4
:
6
M
AS
T
ER
Z
O
N
E
5
:
7
I
N
S
T
A
L
L
E
D
Figure 11: Extra POPIT Installed
Installations described in Figure 10 and Figure 11 are similar, Figure 10 will display the “extra” POPIT
condition because all POPIT switch settings assigned to master zone 5 are unique. In Figure 12, the “extra”
POPIT condition is not displayed due to the duplication of switch settings.
If a POPIT is assigned to the wrong master zone, and it has the same switch settings as a POPIT in that master
zone, the “missing” POPIT condition will be indicated but the “extra” POPIT will NOT be displayed (see Figure
12). Although the installations described in Figure 10 and Figure 12 are similar, Figure 12 will display the
“extra” POPIT condition because all POPIT switch settings assigned to master zone 5 are unique. In Figure 12,
the “extra” POPIT condition is not displayed due to the duplication of switch settings.
2
.5 Z1POINTS 6
2.12 Z8POINTS 00
PROGRAMMED
2.6 Z2POINTS 6
2.7 Z3POINTS 6
2.8 Z4POINTS 6
2.9 Z5POINTS 6
2.10 Z6POINTS 00
2.11 Z7POINTS 00
MASTER ZONE 1: 6
MASTER ZONE 2: 6
MASTER ZONE 3: 6
MASTER ZONE 4: 5
MASTER ZONE 5: 7
MISSING
POPIT
TWO POPITS installed
have same switch setting
(EXTRA POPIT not
displayed)
INSTALLED
Figure 12: POPIT Switch Setting Error

Bosch D8125 Specifications

General

Housing color	-
Input voltage	12 V
Connectivity technology	Wired

Weight and Dimensions

Depth	80 mm
Width	130 mm
Height	20 mm