Bosch DS7220V2 - Page 126

Page 126 P/N: 4998152533-02 Copyright  2007 Bosch Security Systems, Inc. DS7200V2-UK Installer's Guide
PART V: REFRENCE MATERIALS
Event #
Event as shown
in Panel Log
SIA Report
SIA Report Data
Contact ID Report Event Description
Zone Types
Linked to
Event
RPS
Event
Group
Status
Reports
37 Call for Service Service
Required
YX 616 Service
Request
This report sent
automatically at Call for
Service Interval. It does not
indicate a trouble condition.
12 R
38 Cancel Alarm Burglary
Cancel
ri {area} BC {user} 406 Cancel User acknowledged active
alarm before Bell Time
expired, non-fire zone
types.
8
39 Cancel Fire Fire Cancel ri {area} FC {user} 406 Cancel User acknowledged active
alarm before Bell Time
expired, fire zone types.
7
40 CheckSum Fail Parameter
Checksum Fail
YF 303 RAM
Checksum Bad
Checksum on panel’s
parameters failed. Panel
program should be verified.
12 R S
41 ChckSum
Fail,DBus
Parameter
Checksum Fail
pi {SDI address} YF 330 System
Peripheral trouble
Checksum on Option Bus
device parameters failed.
Device should be checked.
12 R S
42 Cls,All,+Dly,Tmr Automatic
Closing
ai {252} CA {area} 403 Automatic O/C System turned All On with
Entry/Exit Delay by Sked
(Timer).
10
43 Cls,All,+Dly,KS Closing
Keyswitch
ss {255} CS {area} 409 Keyswitch O/C System turned All On with
Entry/Exit Delay by
Keyswitch.
10
44 Cls,All,+Dly,
RPS
Remote
Closing
ri {area} CQ {254} 400 Open/Close System turned All On with
Entry/Exit Delay by RPS.
45 Cls,All,+Dly,Tel Remote
Closing
ri {area} CQ {253} 407 Remote
Arm/Disarm
System turned All On with
Entry/Exit Delay by
Telephone.
10
46 Cls,All,+Dly,Usr Closing Report ri {area} CL {user} 401 O/C by User System turned All On with
Entry/Exit Delay by User.
10
47 Cls,All,-Dly,RPS Remote
Closing
ri {area} CQ {254} 400 Open/Close System turned All On with
no delay (instant) by RPS.
48 Cls,All,-Dly,Usr Closing Report ri {area} CL {user} 401 O/C by User System turned All On with
no delay (instant) by User.
10
49 Cls,Prt,+Dly,Tmr Automatic
Closing
ri {area} CA {252} 456 Partial Arm System armed Perimeter
Only with Entry/Exit delay
by Sked (Timer).
10
50 Cls,Prt,+Dly,KS Closing
Keyswitch
ss {255} CS {area} 442 Keyswitch
Armed Stay
System armed Perimeter
Only with Entry/Exit Delay
by Keyswitch.
10
51 Cls,Prt,+Dly,
RPS
Remote
Closing
ri {area} CQ {254} 456 Partial Arm System armed Perimeter
Only with Entry/Exit Delay
by RPS.
52 Cls,Prt,+Dly,Usr Closing Report ri {area} CL {user} 456 Partial Arm System armed Perimeter
Only with Entry/Exit Delay
by User.
10
53 Cls,Prt,-Dly,
RPS
Remote
Closing
ri {area} CQ {254} 456 Partial Arm System armed Perimeter
Only with no delay (instant)
by RPS.
54 Cls,Prt,-Dly,Usr Closing Report ri {area} CL {user} 456 Partial Arm System armed Perimeter
Only with no delay (instant)
by User.
10
55 Frc,All,+Dly,Tmr Forced Closing ai {252} CF {area} 403 Automatic O/C System forced All On with
Entry/Exit Delay by Sked
(Timer).
10
56 Frc,All,+Dly,KS Forced Closing ss {255} CF {area} 400 O/C System forced All On with
Entry/Exit Delay by
Keyswitch.
10
Table 47: Control Panel Events and Reporting Formats (continued)