Bosch rexroth A4VSO 10 Series - Page 19

Safety instructions 15/72
RE 92050-01-X-B1/2019.08.23, Axial piston variable pump A4VSO, BoschRexrothAG
WARNING
Escaping oil mist!
Risk ofexplosion and fire hazard, health hazard, risk ofenvironmental pollution!
▶ Depressurize the machine/system and repair the leak.
▶ Only perform welding work when the machine/system isdepressurized.
▶ Keep open flames and ignition sources away from theaxial piston unit.
▶ Only use a hydraulic fluid that complies the requirements on the
datasheet(Part II) (in accordance with DINENISO80079-36, chapter4.5).
▶ If axial piston units are located inthe vicinity ofignition sources
orpowerful thermal radiators, ashield must beerected toensure any
escaping hydraulicfluid cannot beignited, and toprotect hose lines from
prematureaging.
Electrical voltage!
Risk ofinjury from electric shock orrisk ofproperty damage!
▶ Always disconnect thevoltage supply tothe relevant machine/system part
before installing theproduct and/or connecting ordisconnecting theconnector.
Protect themachine/system against being re-energized.