Bosch rexroth A4VSO 10 Series - 3.1 Operators obligations

General instructions onproperty damage and product damage 19/72
RE 92050-01-X-B1/2019.08.23, Axial piston variable pump A4VSO, BoschRexrothAG
NOTICE
Leakage orspilling ofhydraulic fluid!
Environmental pollution and contamination oftheground water!
▶ Always place adrip tray under theaxial piston unit when adding and draining
thehydraulic fluid.
▶ Use oil binding agents ifhydraulic fluid isspilled.
▶ Observe thesafety data sheet for thehydraulic fluid and thespecifications
provided bythesystem manufacturer.
The warranty exclusively applies tothe delivered configuration.
The warranty will bevoided iftheproduct isincorrectly installed, commissioned
oroperated, orif itisused orhandled improperly.
The warranty will also be voided if the product is serviced by anyone other than
BoschRexrothService or is not serviced within the specified intervals.
3.1 Operator's obligations
The operator has the obligation to check in the order confirmation that the axial
piston unit supplied corresponds to the category needed and the related zone.