Bosch rexroth A4VSO 10 Series - About this Documentation; Validity of the Documentation; Required and Supplementary Documentation

About this documentation 5/72
RE 92050-01-X-B1/2019.08.23, Axial piston variable pump A4VSO, BoschRexrothAG
1 About this documentation
1.1 Validity ofthedocumentation
This documentation isvalid for thefollowing products:
• Axial piston variable pump A4VSO ATEX (series 1x and 30).
This documentation isintended for machine/system manufacturers, assemblers and
service engineers.
This documentationcontains important information onthe safe and proper
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting oftheaxial piston unit.
▶ Read this documentation completely, inparticular chapter 2 "Safety instructions"
onpage 8 and chapter 3 "General instructions onproperty damage and
product damage" onpage 17 before you start work with theaxial piston unit.
1.2 Required and supplementary documentation
▶ Only commission theaxial piston unit ifthedocumentation marked with thebook
symbol
isavailable toyou and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the technical data relevant tothe Axial piston variable pump A4VSO
ATEXseries 1x and 30 ordered.
– Order confirmation
Installation drawing
Contains the outer dimensions, all ports and the hydraulic circuit diagram foryour
Axial piston variable pump A4VSO ATEX.
Please request
theinstallation
drawing from
your contact
atBoschRexroth.
Installation drawing
Axial piston variable pump A4VSO for explosive areas
II 2G Ex h IIC T4-T1 Gb X and II 3G Ex h IIC T4-T1 Gc X
Contains the permissible technical data.
92050-01-X-B2 Data sheet
Control devices DR, DRG, DP, FR and DFR
Contains information on pressure and flow controllers
92060 Data sheet
Power controllers LR2 and LR3
Contains information on power controllers
92064 Data sheet
Hydraulic control, pilot-pressure related HD
Contains information on pilot-pressure related controllers
92080 Data sheet
Hydraulic fluids based onmineral oils and related hydrocarbons
Describes the requirements on a hydraulic fluid based on mineral oil and related
hydrocarbons for operation with Rexroth hydraulic components, and assists you in
selecting a hydraulic fluid for your hydraulic system.
90220 Data sheet
Information onthe use ofhydrostatic drives atlow temperatures
Contains additional information onthe use ofRexroth axial piston units atlow
temperatures.
90300-03-B Manual
Storage and preservation ofaxial piston units
Contains additional information onstorage and preservation.
90312 Datasheet