Bosch Rexroth CS660 - Page 14

14/27
Bosch Rexroth Canada I March 2021 ı Revision 3.0
STEP 5:
Controller
automatically move
the gate to position 3
Continue to next step
Stop to abort
STEP 6:
Recommend to
discharge minimum
100kg or 220lbs
material (more for
better resolution)
Enter weight of the
material collected
Continue to next step
Stop to abort
Complete!
When the material
calibration ends both
Wt/Revs at calibrated
gate position 1 and 3
are refreshed.