NL Troubleshooting
Malfunction Cause and Troubleshooting
flashes. Door is not closed.
1. Close the door.
2. To start the program, press .
All other error codes. Malfunction
▶ Please contact customer service.
→
"Service", page 58
"E:30/-20" Solenoid valve defective.
▶ Please contact customer service.
→
"Service", page 58
Detergent dosage is too high.
▶ When dosing manually, reduce to the full
next wash with the same load the amount of
detergent.
Additional water filled.
▶ Do not fill any additional water into the appliance during operation.
honeycomb.
Device not working. Mains plug of the power cable is not plugged in.
▶ Connect the appliance to the mains.
Fuse is defective.
▶ Check the fuse in the meter box.
Power supply has failed.
▶
Check whether the interior lighting or
other devices are functioning.
Program does not start. was not pressed.
Press .
▶
Door is not closed.
1. Close the door.
2. To start the program, press .
Child lock is activated.
▶ → "
Deactivate child lock", page 34
/ is activated.
▶ Check if / is activated.
→
"Keys", Page 24
Laundry is wedged in the door.
1. Open the door again.
2. Remove trapped laundry.
3. Close the door.
4. To start the program, press .
48
To Next Page
Loading...
