Bosch WAL28PH7NL - Page 52

NL Troubleshooting
Malfunction Cause and Troubleshooting
High spin speed
rental is not
reached.
Low spin speed is set.
▶ For the next wash, set a higher spin
speed in.
is activated.
▶ Select a suitable program for the type of fabric.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶ Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
▶ Start the program Centrifuge .
Program centrifugal
run does not start.
Drain pipe or water drain hose is clogged.
▶ Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶ Make sure that the drain pipe and water drain
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
due to uneven distribution of the laundry.
▶ Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
▶ Start the program Centrifuge .
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶ No error - normal operating noise.
long, humming
loudly before the start
of the washing or
softening cycle.
Intelligent dosing system doses detergent or care
agent.
▶ No error - normal operating noise.
Short buzzing sound
after switching on
of the device.
Intelligent dosing system performs a function test.
▶ No error - normal operating noise.
Loud noise during
spinning.
The appliance is not leveled properly.
▶ Adjusting the device
52