Bosch WAL28PH7NL - Page 54

NL Troubleshooting
Malfunction Cause and Troubleshooting
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶ Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
▶ Start the program Centrifuge .
Detergents can contain water-insoluble substancesDetergent residue on
the damp laundry. which settle on the laundry.
▶ Start the program To rinse.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1. Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 31
2. Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 41
3. Clean the dosing containers.
4. Refill the dosing containers.
→ "Filling the dosing container", Page 35
Basic dosing amount not set correctly.
▶ When the intelligent dosing is activated, re-
then induce the basic dosing amount
→ Page 36.
Detergent residue on
the dry laundry.
Detergents can contain water-insoluble substances,
which deposit on the laundry.
▶ Brush the laundry after washing and drying.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1. Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 31
2. Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 41
3. Clean the dosing containers.
4. Refill the dosing containers.
→ "Filling the dosing container", Page 35
Basic dosing amount not set correctly.
54