78
APPENDIX
Obtaining System Information from the Media Center Display (continued)
Console Region Code Setting: Press the ON/OFF button again. You should see the console
region code setting, similar to DVD REGION CODE: 1.
Console DVD Drive Software Revision and Hardware Information: Press the ON/OFF
button again. You should see the DVD drive software level and drive information, similar to DVD
DRIVE: 1B10 IBA DVD-ROM SD-M1712.
Console Main PCB Test Information: Press the ON/OFF button again. You should see the
test information for the console main PCB, similar to MAIN BD FUNCTIONAL: PASSED.
Console Tuner PCB Alignment Information: Press the ON/OFF button again. You should see
the tuner PCB alignment information, similar to TUNER BD ALIGNMENT: FF.
Console Serial Port (BoseLink Port ) Information: Press the ON/OFF button again. You
should see the serial port information, similar to SERIAL PORT: SMART SPEAKER. You can
toggle the serial port setting by releasing the ON/OFF and ENTER buttons, and pressing the
VOLUME + button. It will change to ETAP. Pressing the VOLUME - button will toggle the setting
back to SMART SPEAKER.
Premium (GSX) Console System Information
Note: The following information will only be displayed on the GSX console. The standard con-
sole will not show this information as it does not have the hard disc drive or the ethernet port.
Hard Disc Drive Information: Press the ON/OFF button again. You should see the hard disc
drive information, similar to HARD DRIVE: KA100A TOSHIBA MK4025GAS.
Hard Disc Drive Self Test: Press the ON/OFF button again. You should see the hard disc drive
self test results, similar to HARD DRIVE SELF TEST: 00 00 00 10e5 0033r.
Gracenote Database Information: Press the ON/OFF button again. You should see the cur-
rently installed version of the Gracenotes database, similar to GRACENOTE DATABASE:
HDD...DB: 01.01.03.
Ethernet Address Information: Press the ON/OFF button again. You should see the current
ethernet address information, similar to ETHERNET ADDRESS: 000C8A008BCE.