67
Computer Setup Procedure
Use this procedure to set up your IBM
compatible PC for communication with the
3•2•1 system console.
1. Open a terminal window, as shown
at right, in either Terminal or Hyperterm,
as applicable for the version of Microsoft
®
Windows
®
you are using on your PC.
2. In the terminal window, click on FILE, then
PROPERTIES. Set the properties in the
dialog box as shown at right.
3. In the properties dialog box shown in step
2, click on CONFIGURE to set the COM1
Properties as shown at right. Click OK to
return to the properties dialog box.
See the next page for the conclusion of this
setup procedure.
To Next Page
Loading...
Need help?
General
