Bose LIFESTYLE 18 II Series

Questions and Answers:

J
Joseph SolomonAug 12, 2025
How to fix a blinking red light on my Bose Receiver?
- D
  dana17Aug 13, 2025
  If the Status LED is blinking red on either the SL2 transmitter or receiver of your Bose system, start by disconnecting the unit from the AC power outlet. Ensure there are no obstructions to ventilation and reposition the unit upright, providing clear space around the ventilation openings. If ventilation was blocked, allow the unit to cool for a few minutes before reconnecting it to the power outlet. Check the cable connection between the SL2 receiver and the surround speakers to ensure the connections are secure and the cable wires are not touching each other. If the issue persists, unplug the unit and contact Bose Customer Service.
D
Daniel OrozcoAug 17, 2025
Why is my Bose Receiver interfering with my wireless phone?
- M
  Mason CastroAug 17, 2025
  If your Bose Receiver is causing interference with a wireless (5.8GHz) phone, try increasing the distance between each SL2 unit and the phone. If your phone has a channel button, press it to select a different channel for phone transmissions.
E
Emily RobinsonAug 21, 2025
How to fix a Bose Recording Equipment system that will not turn on?
- M
  Mrs. Kelly HerreraAug 21, 2025
  If your Bose Recording Equipment system isn't turning on, ensure that the VS-2 cable is correctly connected between the VS-2 and the media center. Also, verify that the media center power supply is properly plugged into an AC receptacle.
M
Mr. Nicholas Frazier DDSAug 26, 2025
What to do if there is no picture on my TV with Bose Recording Equipment?
- K
  Kelly MorrisAug 26, 2025
  If you're not getting a picture on your TV with your Bose Recording Equipment, first load the software update disc into the DVD player. Then, check that the VS-2 cable is correctly connected between the VS-2 and the media center, and that you've connected your TV to the TV output connector on the VS-2. Finally, ensure you've selected the correct video input on your TV.
M
Matthew RichardsonAug 29, 2025
Why is the wrong picture appearing on my TV with my Bose Recording Equipment?
- R
  Robert KelleyAug 29, 2025
  If the wrong picture appears on your TV for the source you selected on your Bose Recording Equipment, try these steps: 1. Load the software update disc into the DVD player. 2. Ensure your sources are connected to the appropriate VS-2 inputs. 3. Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector. 4. Verify that you have selected the correct video input on your TV.
L
Lisa MillerSep 3, 2025
What to do if some sources do not appear on my TV with Bose Recording Equipment?
- H
  hannahgonzalesSep 3, 2025
  If some sources do not appear on your TV when using your Bose Recording Equipment, ensure your sources are connected to the appropriate VS-2 inputs. Also, make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept.