For
cable/satellite
control
While you can set the
L1FESTYLE®
remote to control both cable and satellite boxes, you must
designate one
or
the other, not both,
in
the steps below.
The one connected to the CBL-SAT input
on
your media center
is
the one you should desig-
nate. So when you press the
CBl-SAT
source button and the
On/Off
button below it, you are oper-
ating that device.
You
can designate the other under AUX Device. Do this only if the device is connected to the
AUX input on the media center, or the AUX input is not being used.
J
Note:
For general guidelines
on
using the
L1FESTYL~
System menu, refer to "Using System
Menus" on page 29.
Follow
the
process
below:
Turn on the cable
or
satellite box, whichever you are setting the remote
to
control. Turn on the
TV and be sure to select the Video input on the TV for the media center. Then, using the
L1FE-
STYLE®
remote control, press the
CBl·SAT
source button and follow the steps below:
1.
Identify the device:
• From the
Remote
Control
options
in
the System menu, select
CBUSAT
Device.
• Move right and select either Cable or
Satellite
by
pressing
Enter.
2.
Identify the brand:
•
In
the menu options on the left, select
CBUSAT
Brand.
• Move
to
the right and up or down
in
the alphabetical list to locate your brand.
• Press
Enter
to
select that brand.
3.
Select the device code:
• From the menu options on the left, select
CBUSAT
Device
Code.
• Move right to select the first code.
• Press the
CaUSAT
On/Off
button on your
L1FESTYLE®
remote. Press that button again.
If the Cable or Satellite box turns off and on again, you have chosen the right code.
If it does not turn off, select another code, and press the
CBUSAT
On/Off
button
two
more
times.*
• When you have chosen the right code, press the
Enter
button.
• Press the
System
or
Exit
button to leave the System menu.
When you complete these settings, you can use the
CBl-SAT
On/Off
button
to
turn on your Cable
or Satellite source and other
L1FESTYLE®
remote buttons to operate it.
*Some manufacturers use a number
of
similar device codes. After selecting one, you may find
you can turn your Cable
or
Satellite box
on
and off,
but
are unable to change channels or
select Play or Pause.
In
that case, select a different device
code
that provides more control.
21
To Next Page
Loading...
