7.
Set the
TV
to turn on automatically*, as needed:
• Move up
to
the System menu categories and over
to
Video
(Figure
6).
• From the
Video
options, select TV Power.
• Move right into the list
of
choices and up or down
to
select one
of
the two below:
-Automatic
(for
TV
models that do not use a European style SCART connector)
-Euro
Connector
(for
TV
models that use a SCART connector)
• Press the
Enter
button.
Figure
6
Changing the
IV
Power
20
*For the Automatic feature to work effectively with North American
TV
models, the optional
TV sensor must be installed and positioned
to
detect if the
TV
is on or off.
In
Europe, a
SCART connector serves this purpose. If you do not use a SCART connector, or the TV sen-
sor is not positioned properly, the automatic feature
is
not
an
option.
In
that case, leave the
TV power set
to
Manual. This means you must turn your
TV
on using its power button or with
the
LIFESTYLE®
remote (when it is set
to
do
so).
8.
Notice the TV
Power
Status:
• TV
Detected
means the installed
TV
sensor
is
working.
• TV
Not
Detected
means the
TV
sensor (if installed)
is
not positioned properly, or a
SCART connector
is
installed.
• Press
System
or
Exitto
leave the System menu.
J
Note:
For information on using the
TV
sensor, refer to "Installing the
TV
on/off
detector"
in
your
Installation Guide.
To
check for positioning
of
the sensor, refer to "The media center" on page 10
To Next Page
Loading...
