Figure
26
AUX
input connections
CD
changer or other playback equipment
Using
digital
audio
connections
If your
TV,
VCR, tape deck,
or
AUX component has digital audio output jacks, you may con-
nect them to the media center.
In
addition
to
the digital connection, be sure
to
connect
Land
R stereo outputs from the component
to
the media center. This will provide uninterrupted
audio. See Figure 27.
• For a digital connection, use a
750
cable with RCA connectors (such
as
a video cable).
• For
an
optical digital connection, insert
an
optical digital cable into the Optical
IN
on the
media center rear panel. Use the Optical OUT jacks on the media center rear panel if you
plan to make a digital recording from that component.
J
Note:
Before you can listen
to
a source through the OPTICAL input, you need
to
assign the
OPTICAL connection
to
that
source_'
TV,
VCR,
CBUSAT
or
AUX. See
your
operating guide for
instructions on using the system menus.
Figure
27
Digital audio
and
other
media center pane!
connections,
30
Antenna extender
IR
emitter
Serial data
Optical audio connections
"-----r~-
Digital audio connections
To Next Page
Loading...
