Using Component video connections
Follow the connection diagram
in
Figure 23
to
achieve the best video quality for
DVD
and
cable/satellite viewing, while adding a VCR
to
your home theater. Refer
to
"Component
video" on page
24, if necessary.
To
watch DVDs and see
L1FESTYLE®
system menus, select the VIDEO 4 input on your
TV,
or,
jf your cable/satellite box has component jacks, connect them as shown
in
the diagram and
select VIDEO 4 on your
TV.
Select CBUSAT on your
L1FESTYLE®
system remote.
Connect the VCR (VIDEO OUT) to an available VIDEO
IN
jack on your
TV.
Select that
TV
input.
Connect the VCR (Audio
Land
R OUT)
to
the TV Audio
IN
jacks on the media center and
select the TV source on your
L1FESTYLE®
system remote.
Figure
23
Component video
connection
J Note:
To
make
the
connections shown in the diagram below, you will need additional cables.
Component video adapter
TV
VCR
SET TOP BOX
J Note:
Two
component video adapters are provided.
27
To Next Page
Loading...
