Using
your
LIFESTYLE®
remote
lNith
other
components
You
can control most brands
of
external components, such as TVs, VCRs, and cable/satellite
boxes, using your
LIFESTYLE®
remote control.
You
can also designate one
of
these compo-
nents as the video tuner (channel selector) for all, to further simplify operation.
Your
LIFESTYLE®
system includes
an
infrared
(IR)
emitter that sends out signals from the front
of
the music center
to
any component that your
LIFESTYLE®
remote is set
to
control. This
allows you
to
turn on other sources
in
the room and make basic selections from them,
whether they are connected to the media center or
to
the
TV.
)
Note:
If
a component
is
located where it cannot receive these
IR
signals, you can use the
supplied
IR
emitter cable with that component. For tips on getting the
IR
signals where they need
to go,
or
using the optional emitter, see "Connecting the
optionallR
emitter cable"
in
your Instal-
lation Guide.
For
TV
control
)
Note:
For general guidelines on using the
LIFESTYLE®
System menu, refer to "Using System
Menus" on page 29.
Use the TV remote to turn on the
TV.
Be sure to select the Video input on the
TV
for the media
center.
Then, using the
LIFESTYLE®
remote control:
1.
Press the
TV
button
to
select the
TV
source.
2.
Press the
System
button. The System menu will appear on the TV screen (Figure
4).
3.
Move across the categories to
Remote
Control
to preview these menu options.
4.
Press the
Down
arrow or
Enter
to move into that menu.
Figure 4
Preview
of
Remote features
in
the System menu
18
To Next Page
Loading...
