How
to
change
the
settings
In
the Settings menu on the media
center display or on the TV screen,
move around and make changes
by using the selection buttons shown.
..
On
the display or the screen, the same actions apply:
• Press the
left,
right,
up
or
down
arrows to get
to
the option you want.
• Press
Enter
or the
left
arrow
to
confirm your selection and move back to the features column.
• Repeat those steps for each change you want
to
make.
• Press the
Exit
button on the remote control to leave the Settings menu.
The progression below shows how to change the number
of
speakers used
in
FM
(Figure 1
0).
A.
The
FM
Settings menu appears on the
TV
screen with 5 speakers as the default setting.
B.
Arrow
buttons move right and up or down to change the number
of
speakers playing.
C.
Enter
or
left
arrows confirm the new setting and move back
to
the list
of
tuner attributes.
Figure
10
Changing the
number
of
speakers playing
You
can use the actions above
to
restore the original settings, too.
Do
this if you do not like
the effect of a change you have made, or accidentally made a change you did not intend.
The original (default) settings for each source are shown as the first option for each feature on
the pages that follow.
)
Note:
You
can restore all default settings
by
choosing Restore
Settings
in
the Systems menu,
under
Media Center. This reverses all changes you have made
in
both the Settings
or
System
menus. Instead
of
making this overall change, you can note the default setting listed on the
pages that follow, then re-select that setting
in
any
of
the sources.
25
To Next Page
Loading...
