Follow
the
process
below:
Turn on your component. Turn on the
TV
and be sure
to
select the Video input on the
TV
for
the media center. Then using the
LIFESTYLE®
remote control, press the
AUX
source button and
continue:
1. Identify the device:
• From the
Remote
Control options
in
the System menu, select AUX Device.
• Move to the right and up or down
in
the list
to
select a component by pressing Enter.
2.
Identify the brand:
•
In
the menu options on the left, select AUX Brand.
• Move to the right and up or down
in
the alphabetical list to locate your brand.
• Press
Enter
to
select that brand.
3.
Select the device code:
• From the menu options on the left, select AUX Device Code.
• Move right to select the first code.
• Press the
Play
or
Channel/Track
up
button on the
LI
FESTYLE®
remote control.
If the component responds, press other buttons
to
make sure important functions on
the component also work. If the component does not respond, select a different code
and try again.
• When you have chosen the best code for your component, press the
Enter
button.
• Press the
System
or
Exit
button
to
leave the System menu.
Designating
one
video
tuner
If the
LIFESTYLE®
remote controls several video components, you can choose one
of
them
as the primary channel selector. This gets your channel tuning commands
to
your cable box,
even when TV or VCR is selected.
You
don't
need
to
switch to CBUSAT to change channels.
)
Note:
For general guidelines on using the
LIFESTYLE®
System menu, refer to "Making system
adjustments" on page 29.
Make this selection from the
Remote
Control options
in
the System menu.
In
the TV Tuner list,
select one
of
your components. Then press the
System
or
Exit
button to leave the menu.
Figure
7
Designating the TV as video
tuner
23
To Next Page
Loading...
