For
VCR (or
DVRJ
control
The list
of
VCR brands and VCR codes include selections for
OVRs
as
well. By following the
instructions below, you can set the remote
to
control one
or
the other, but not both.
If you have both a VCR and a
OVR,
setting your remote to control the DVR will provide
more control options. Whether yours is a standalone
OVR
or is coupled with the VCR or
Cable/Satellite
box
makes no difference.
J
Note:
For general guidelines on using the
L1FESTYL~
System menu, refer to "Using System
Menus" on page 29.
Follow
the
process
below:
Turn on your VCR
or
OVR.
Turn on the
TV
and be sure
to
select the Video input on the TV for
the media center. Then, using the
L1FESTYLE®
remote control, press the
VCR
source button
and follow the steps below.
1. Identify the brand.
• From the
Remote
Control options
in
the System menu, select VCR Brand.
• Move right into the list
of
brands and up
or
down
to
locate your brand
of
VCR or
OVR.
• Press
Enterto
select that brand.
2. Choose a device code:
•
In
the menu options on the left, select VCR Device Code.
• Move right
to
select the first code.
• Press the
VCR
On/Off
button on your
L1FESTYLE®
remote. Press this button again.
If the VCR
or
OVR
turns off and on again, you have chosen the right code.
If the VCR or
OVR
does not turn off and on, select another code, and press the
VCR
On/Off
button
two
more times.*
• When you have chosen the right code, press the
Enter
button.
• Press the
System
or
Exit
button
to
leave the System menu.
When you complete these settings and select
VCR
as the source, you can
now
use the
VCR
On/Off
button and press
Play,
Pause,
or
Stop
to
control your VCR.
If you have made the remote settings for a
OVR,
you can also use the
Seek
button on the
L1FESTYLE®
remote.
On
some
OVRs,
pressing
Shuffle
and
Repeat
buttons will allow you
to
skip
backward or forward qUickly.
For
AUX
control
If you have a
component
connected
to
the AUX input on your media center, you can set your
L1FESTYLE®
remote
to
control it, although on and off control is not an option.
If you
do
not have a component connected
to
AUX, you can still control another device by
selecting it from the list
of
AUX device choices: Changer, Satellite, Cable,
OVR,
TV or VCR.
To
exercise this control, you must press the
AUX
source button first.
J
Note:
For general guidelines on using the
LlFESTYLE®
System menu, refer to "Using System
Menus" on page 29.
*Some manufacturers use a number
of
similar device codes. After selecting one, you may find
you can turn your VCR or
OVR
on and off, but are unable
to
change channels or select Play
or
Pause.
In
that case, select a different device code that provides more control.
22
To Next Page
Loading...
