Connecting
your
cable/satellite
box
to
the
system
There are various ways to make the cable/satellite connections:
1.
Connect cable/satellite L & R Audio OUT to the L &R Audio
IN
jacks
on
the media center.
• If the cable/satellite box has a DIGITAL Audio OUT jack, connect it to the
CaUSAT
DIGITAL Audio
IN
jack on the media center.
2.
If the cable/satellite box has
an
S-VIDEO OUT jack, connect it to the S-VIDEO
IN
jack on
the media center. Use another S-VIDEO cable to connect the S-VIDEO OUT jack on the
media center to
an
S-VIDEO jack on the
TV.
• If the cable satellite box has only a composite VIDEO OUT jack, connect that to the
composite VIDEO
IN
jack on the media center.
Connect a VCR
to
this system as follows:
1.
If your cable satellite box has
an
additional set
of
Audio and VIDEO OUT jacks connect
them to the corresponding Audio and VIDEO
IN
jacks on your VCR.
2.
Connect the VCR to the VIDEO
IN
jack on the media center. If that jack is unavailable,
connect the VCR directly to the TV
In
Figure 22, select Input 2 on your
TV
to
watch cable/satellite programs. Select the CBUSAT
sound source. This input will also provide better video quality when watching DVDs.
To
watch
videotapes, select Input 1 on your
TV
(or the TV input to which you directly connected the
VCR)
and select the VCR sound source.
J Note: Additional cables
may
be purchased
at
an electronics store or authorized
Bose®
dealer.
SET TOP BOX
If the CBUSAT box has only a composite
VIDEO OUT jack, connect that
to
the com--
posite
VIDEO
IN
jack on the media cen-
ter.Connect the VCR composite VIDEO
OUT
directly to the TV
/~
Cable
TV,
satellite,
or
---
antenna
cable
Set top box and
VCR
Figure
22
26
To Next Page
Loading...
