Finishing
the
basic installation
Figure
17
Setup discs
and
AdaptiQ
audio calibration system
Your system comes with
two
compact
discs.
ADAPTiQ@
audio calibration system
Setup Disc 1
Setup Disc 2
ADAPTiQ calibration headset
• Setup Disc 1 provides information about your system and verifies
that
your speakers are
connected correctly.
• Setup Disc 2 leads you through the ADAPTiQ audio calibration process, which tailors the
sound
of
your
L1FESTYLE®
system and your speaker placement
to
the acoustics
of
your
listening area.
The special headset, designed
to
be worn above your ears, enables you
to
take acoustic
measurements during the process. Put it on only when Disc 2 indicates.
Play both discs when everything is
in
place and you have made all
of
the
connections. Allow
approximately 20 minutes
to
complete the process.
You
may want
to
do
it
when the acoustic
measurements will not disturb anyone.
)
Note:
The
220-240V LlFESTYLE® 18 Series
/I
system includes Disc 1 only.
Owners
of
that system do not need
to
follow the instructions for Disc 2 below.
21
To Next Page
Loading...
