Video options
Figure
13
Video preview
Press the
System
button on the LIFESTYLE® remote control. Move right
to
see a preview
of
video features. Press the
Enter
button
to
move into an active display
of
submenus.
Important
Note:
DO
NOT
change settings for Component
video
or
Progressive scan
in
the System
menu. Doing
so can cause your
TV
screen to
go
blank, making completion
of
the process difficult.
Instead refer to "Activating component
or
progressive scan connections" on
page
11.
Default
Settings;
Active
Display
Item
Options
Effect
of
this
Setting
TV Power
Automatic
TV turns on automatically when a video source is selected.*
Manual
TV does not
come
on automatically.
Euro
TV responds
to
SCART connector input.
TV Power Status TV Not Detected
Indicates: TV Sensor not installed
or
not positioned correctly.
(not a setting)
TV On
Indicates: TV Sensor installed and functioning properly.
TV Aspect Ratio
Normal
4:3 ratio screen display.
Widescreen
16:9 ratio widescreen display.
Widescreen DVDs
Modified
DVD video reformats, as needed,
to
fit a 4:3 TV screen.
Unmodified
DVD video does
not
reformat automatically.
Video Connector
Composite, S-VIDEO
System
works
with composite
and/or
S-video TV connection.
(See Important Note above.)
Component
System works with
component
TV connection.
Video Black Level
Normal
Screen black level generally appropriate
for
TVs.
Extended
Reduces screen black level, appropriate for certain TVs.
Video Format
NTSC
Correct
for
NTSC (U.S. standard) monitors.
PAL
Correct
for
PAL (European standard) monitors.
Progressive Scan
Off
Screen image repaints
in
standard style.
(See Important Note above.)
On
Screen image repaints
in
advanced style (if available on the
TV).
*With
most
TV models, the TV sensor
must
be
installed and positioned
to
detect
if the TV is
on
or
off.
In
Europe, a SCART connector communicates with the
TV.
If your system setup is
different from either
of
these, using the automatic feature is
not
an option.
J
Note:
For information on using the
TV
sensor, refer to "Installing the
TV
on/off
detector"
in
your
Installation Guide.
32
To Next Page
Loading...
