BASIC SYSTEM CONNECTIONS
2
Connect
the
speaker
cables
to
the
module
You
may find it convenient
to
temporarily turn the module upside down while making these
connections. Then, be sure
to
place the module on its side or bottom surface when the
connections are completed.
A CAUTION: Before you make these connections,
be
sure that the media center
and
the
Acoustimass® module are
NOT
yet connected to an
AC
(mains)
power
outlet.
The RCA plugs on the free end
of
the speaker cables are colored
to
match the colored
speaker connectors on the Acoustimass connection panel. For a color reference, you may
want
to
use the Quick Setup Guide provided
in
the carton.
A.
Connect the front speaker cables
to
the Acoustimass module (Figure
6):
• Plug the white front left
(L)
cable into the white
Front
L connector.
• Plug the light blue front right
(R)
cable into the light blue
Front
R connector.
• Plug the brown front center
(C)
cable into the brown
Front
C connector.
B.
Connect the rear speaker cables
to
the Acoustimass module (Figure
6):
• Plug the light green left rear
(LR)
cable into the light green
Rear
LR connector.
• Plug the purple right rear
(RR)
cable into the purple
Rear
RR connector.
Figure
6
Right Rear
Right Front
Center Front
Left Front
Left Rear
Speaker connections to the
Acoustimass® module
14
Acoustimass module
connector
panel
If
you
need
longer
cables:
To
lengthen speaker cables, as needed, you can splice
in
18-gauge or thicker cord
(connecting
+
to
+ and - to -).
Or,
you can order heavy-duty speaker extension cables from
Bose.
To
contact Bose directly, refer
to
the contact list provided
in
the carton.
To Next Page
Loading...
