OPTIONAL CONNECTIONS AND ADDITIONS
Adding audio record/playback
equipment
Figure
23
AUXinput connections
32
Using a standard RCA stereo audio cable, you can connect external playback and recording
equipment such as CD players and tape recorders
to
the rear panel
of
the media center.
• If the equipment does not have right and left output connectors, use a Y adapter
to
connect
it
to
the media center. Appropriate cables and adapters are available at most electronics
stores.
• If the component has digital audio connectors (coaxial or optical), you can make digital
audio connections
to
the media center. Refer
to
"Using digital audio connections" on
page 27. With either type
of
digital connection, be sure
to
use
an
analog connection, too.
To
connect playback
equipment
Connect the AUDIO OUT on the playback equipment
to
the AUX Audio
IN
connectors on the
media center. Insert the white plug into the L (left) Audio
IN
connector and the red plug into
the R (right) connector (Figure
23).
Media center connector panel
Playback equipment
connector panel
CI
CI
CI
To Next Page
Loading...
