OPTIONAL CONNECTIONS AND ADDITIONS
Using
the
TV
on/off
sensor
•
":'0
'
eie
::
'
••••••••.•.•••••••••..••••.•..•••.••••••••••.••.•.•••.••.••.•.••••••.••.••.•.•.•••.•••••.••••••••.•..••..••...•..••.••.•••.•.••••.•••••••••.•.••••••••.••.••.••.••••.•••••••.•••..••.
@
•.••.•••.•••.•..•.••..•.•••••••...••
@
••••...•••.••.••••.•..••••.••••••.•.••••.•••••.•••••.••••.
'
'.
'
:v::",:,,::,:t:::::;:':';::;S;',:::';:,;:::>f:,:,:;:;:,:::::',:11:
TV
connection
panel
example
TV
on/off
sensor
The TV
on/off
sensor works with the system
to
automatically turn on the
TV,
as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not
to
use the
sensor, you need
to
turn on your TV separately.
Note:
For information on
how
to set the
LIFESTYLE?
remote to control your
TV
and
work with the
sensor, refer to your Operating Guide.
When installing the sensor on large TVs, you may need the help
of
another person so you can
position the sensor while someone else watches the TV screen.
1.
Plug the sensor cord connector into the TV
Sensor
connector on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
connector provided on the adapter (Figure
21
on page 30).
2. Temporarily position the TV
on/off
sensor on the
back
of
your
TV.
Note:
00
NOT
attach the supplied mounting strip until you have tested
and
activated the
automatic feature
as explained starting with Step
3.
TV
on/off
sensor installed
on your TV
Figure
19
Note:
Mount
the sensor on the bottom rear
of
a projection
TV
chassis. Front projectors with a
separate screen
may
not
work with the sensor.
3. Turn on your TV
to
test the sensor and activate the feature.
4.
Press the
System
button on the LIFESTYLE® system remote.
5.
Press the right arrow key
to
highlight the
Video
tab. Press Enter.
6.
Move the sensor around on the
back
of
the TV and watch the TV
Power
Status
line
in
the onscreen display. Find a location for the sensor where the status changes from TV
not
detected
to
TV ON.
7.
At
this location, attach one
of
the included mounting strips.
8.
Attach the other mounting strip
to
the sensor and mount it
to
the
TV.
9.
Using the
up/down
arrow keys, highlight TV
Power
and press Enter.
10. If you want your TV
to
turn on automatically when you turn on your LIFESTYLE® system,
make no change (default is Automatic) and press
Exit
to
leave the System menu.
If you used a SCART adapter
for
the TV connection, choose EURO and press Enter.
Press
Exit
to
leave the System menu.
28
To Next Page
Loading...
