BASIC
SYSTEM CONNECTIONS
6
Connect
video
source
outputs
to
VS-2
video
inputs
Figure
10
VS-2 input connections
The VS-2 has video input connectors for a cable/satellite
box
(CBL-SAT), a VCR, and one
other source (AUX). The type
of
video connection used
for
your TV determines the
type
of
connection you can use for a video source:
If
the
connection
you
made
to
your
TV
is:
HDMI™
use any type
of
connection
for
your sources.
Component
use a component, S-Video,
or
composite video source connection.
S-Video
use either an S-Video
or
composite video source connection.
Composite
use either an S-Video
or
composite video source connection.
VIDEO
OUT
~HDMI
.ci
t
•
os--
.Com~
Note:
If
after turning on your
system you
can't
view cable/
satellite programs through an
HOMI connection, you
may
need
to change the video output set-
ting
in
your cable/satellite box.
To
do this, use another type
of
video
connection
so you can view the
onscreen menu from your cable/
satellite box. Then change the
connection
back
to HOMI.
VIDEO
OUT
AUX
~HDMI
.ci
t
•
os--
•
Compoolt.
.i
t
•
os--
(
VIDEO
OUT
~HDMI
I~
L::::J1
CBL.SAT
I~
c=J
!I
Not
available on
VS-2 AUX
IN
18
To Next Page
Loading...
