BASIC SYSTEM CONNECTIONS
10
Install
the
remote control batteries
Figure
15
Remote control battery
installation
22
You
need the four AAA (IEC-LR3) batteries
to
complete this step.
A.
Slide the battery compartment cover from the end
of
the remote (Figure 15).
B.
Insert the batteries, making sure you match the polarity
of
the batteries with the
polarity markings
(+
and
-)
inside the battery compartment.
C.
Slide the cover back on the remote until it snaps shut.
Note: While the battery compartment
is
open,
be
careful
not
to accidentally change the settings
of
the factory-preset miniature switches. They should
be
changed only as directed
in
the Refer-
ence section
of
the Operating Guide.
Four
(4)
AAA (IEC-LR3)
batteries
~
Battery compartment cover
Battery
replacement:
Replace
all
four batteries when the remote control stops operating or its range seems
reduced. Alkaline batteries are recommended.
Note: For information on
how
to set the LIFESTYLf® remote to control your
TV,
refer to your
Operating Guide.
Next
Congratulations! You have placed.the.system
in·.
your
room. and connected.all
the
parts
together.
To
turn
on.
your
system
for
the
first
time
and
start using.it,.go
to
"Firsl-Time·Operatio.n"on.page
••
23.
To Next Page
Loading...
